The Smart DI+TM from Powers Fasteners is an all steel internally threaded anchor designed with safety, reliability and speed in mind. The patented Smart DI+TM design reduces the amount of force required to set the anchor. What used to take approximately 20 hammer blows on a typical 3/8 diameter part can now be accomplished in approximately 5 blows. Reducing overall labor costs by approximately 50% the cylindrical plug design concentrates more expansion at the bottom of the anchor where it’s needed to maximize performance.
With the added feature that allows a contractor, general foreman or inspector to see if the anchor has been set, Smart DI+TM drop-in is not only easy to set but safer than convention drop-in anchors.
Smart DI+TM drop-in has the highest safety rating in its class. That not only makes the choice smart, but easy!
The drop-in is easy to use: First, drill the hole with Smart DI+ BitTM. Then lock on the Smart DI+TM setting tool. Finally, drive the plug with the same tool used to drill the anchor hole.
