From Metabo CorporationMetabo Corporation now offers two 1/2" hammer drills that increase productivity. The SBE710 and the SBE 1100 Plus can be used on various construction materials, including concrete block, solid concrete and brick.
The SBE710 1/2" hammer drill features Metabo’s Variospeed electronic speed control that allows the user to easily regulate the speed from the lowest value to the highest. It has a maximum impact rate of 59,000 bmp, is rated at 5.8 amps and provides a maximum drilling diameter of 3/4" in concrete, 1/2" in mild steel and 1 9/16" in soft wood.
The 2-speed aluminum die cast gear box in the hammer drill offers a no-load speed of 0 rpm–1,000 rpm in first gear and 0 rpm–3,100 rpm in second gear with a maximum tightening torque of 248 inch-lbs. The tool features a 1/2" geared chuck.
The SBE 1100 Plus 1/2" hammer drill features Metabo’s Vario Tacho Constamatic speed stabilization that increases efficiency by working at nearly 100% of the no-load speed right up to the full rated amp load of 9.6 amps.
This hammer drill also has a 2-speed die cast aluminum gear box and offers a no-load speed of 0 rpm–900 rpm in first gear and 0 rpm–2,800 rpm in second gear with a maximum tightening torque of 389 inch-lbs.
The SBE 1100 has a maximum impact rate of 53,000 bmp and provides a maximum drilling diameter of 3/4" in concrete, 5/8" in mild steel and 1 9/16" in soft wood.