Featured Products

Aluminum Panel Clips

From Outwater
Don’t get hung up hanging wall panels, partitions, cabinets, signage or frames. Conventional, dated hanging methods are now a thing of the past with Outwater’s [Outwater Plastics Industries, Inc. + Architectural Products by Outwater, LLC] new Aluminum Panel Clips, the quickest, easiest and most cost effective way for hanging anything you hate to hang.

Outwater’s Aluminum Panel Clips enable quick and easy installations with labor and overall cost savings reduced by as much as 50%. Builders, contractors and renovators now only have to attach the upper portion of the Aluminum Panel Clip to the back of the object to be hung and the lower Aluminum Panel Clip to the mounting surface to prepare the item for installation. Cabinets, wall panels, partitions, signs and frames can now be securely and solidly affixed in just minutes using Outwater’s Aluminum Panel Clips, which connect and lock together by merely lowering the upper Aluminum Panel Clip that has been attached to the object to be hung into the groove of the lower Aluminum Panel Clip that has been fastened to the intended mounting surface. In addition, unlike typical hanging methods, which are inherently permanent, Outwater’s Aluminum Panel Clips readily allow items to be demounted as required.

Outwater’s Aluminum Panel Clips are stocked in mill finished, extruded aluminum 4', 8' and 12' lengths and precut 1 1/2", 2" and 2 1/2" pieces both with and without predrilled holes (holes are 3/16" diameter and accommodate #10 screws) in 8 different profiles, permitting installed items to rest flush against any mounting surface.

Learn more at www.outwater.com.

www.outwater.com